Snowflake Streaming Loader configuration reference

The configuration reference in this page is written for Snowflake Streaming Loader 0.2.2

Snowflake configuration

Parameter	Description
output.good.url	Required, e.g. https://orgname.accountname.snowflakecomputing.com. URI of the Snowflake account.
output.good.user	Required. Snowflake user who has necessary privileges
output.good.privateKey	Required. Snowflake private key, used to connect to the account
output.good.privateKeyPassphrase	Optional. Passphrase for the private key
output.good.role	Optional. Snowflake role which the Snowflake user should assume
output.good.database	Required. Name of the Snowflake database containing the events table
output.good.schema	Required. Name of the Snowflake schema containing the events table
output.good.schema	Optional. Default value `events`. Name to use for the events table
output.good.channel	Optional. Default value `snowplow`. Name to use for the Snowflake channel. If you run multiple loaders in parallel, then each channel must be given a unique name.

Streams configuration

AWS

Parameter	Description
input.streamName	Required. Name of the Kinesis stream with the enriched events
input.appName	Optional, default snowplow-snowflake-loader. Name to use for the dynamodb table, used by the underlying Kinesis Consumer Library for managing leases.
input.initialPosition	Optional, default LATEST. Allowed values are LATEST, TRIM_HORIZON, AT_TIMESTAMP. When the loader is deployed for the first time, this controls from where in the kinesis stream it should start consuming events. On all subsequent deployments of the loader, the loader will resume from the offsets stored in the DynamoDB table.
input.initialPosition.timestamp	Required if input.initialPosition is AT_TIMESTAMP. A timestamp in ISO8601 format from where the loader should start consuming events.
input.retrievalMode	Optional, default Polling. Change to FanOut to enable the enhance fan-out feature of Kinesis.
input.retrievalMode.maxRecords	Optional. Default value 1000. How many events the Kinesis client may fetch in a single poll. Only used when `input.retrievalMode` is Polling.
input.bufferSize	Optional. Default value 1. The number of batches of events which are pre-fetched from kinesis. The default value is known to work well.
output.bad.streamName	Required. Name of the Kinesis stream that will receive failed events.
output.bad.throttledBackoffPolicy.minBackoff	Optional. Default value 100 milliseconds. Initial backoff used to retry sending failed events if we exceed the Kinesis write throughput limits.
output.bad.throttledBackoffPolicy.maxBackoff	Optional. Default value 1 second. Maximum backoff used to retry sending failed events if we exceed the Kinesis write throughput limits.
output.bad.recordLimit	Optional. Default value 500. The maximum number of records we are allowed to send to Kinesis in 1 PutRecords request.
output.bad.byteLimit	Optional. Default value 5242880. The maximum number of bytes we are allowed to send to Kinesis in 1 PutRecords request.
output.bad.maxRecordSize.*	Optional. Default value 1000000. Any single event failed event sent to Kinesis should not exceed this size in bytes

GCP

Parameter	Description
input.subscription	Required, e.g. projects/myproject/subscriptions/snowplow-enriched. Name of the Pub/Sub subscription with the enriched events
input.parallelPullCount	Optional. Default value 1. Number of threads used internally by the pubsub client library for fetching events
input.bufferMaxBytes	Optional. Default value 10000000. How many bytes can be buffered by the loader app before blocking the pubsub client library from fetching more events. This is a balance between memory usage vs how efficiently the app can operate. The default value works well.
input.maxAckExtensionPeriod	Optional. Default value 1 hour. For how long the pubsub client library will continue to re-extend the ack deadline of an unprocessed event.
input.minDurationPerAckExtension	Optional. Default value 60 seconds. Sets min boundary on the value by which an ack deadline is extended. The actual value used is guided by runtime statistics collected by the pubsub client library.
input.maxDurationPerAckExtension	Optional. Default value 600 seconds. Sets max boundary on the value by which an ack deadline is extended. The actual value used is guided by runtime statistics collected by the pubsub client library.
output.bad.topic	Required, e.g. projects/myproject/topics/snowplow-bad. Name of the Pub/Sub topic that will receive failed events.
output.bad.batchSize	Optional. Default value 1000. Bad events are sent to Pub/Sub in batches not exceeding this count.
output.bad.requestByteThreshold	Optional. Default value 1000000. Bad events are sent to Pub/Sub in batches with a total size not exceeding this byte threshold
output.bad.maxRecordSize	Optional. Default value 10000000. Any single failed event sent to Pub/Sub should not exceed this size in bytes

Azure

Parameter	Description
input.topicName	Required. Name of the Kafka topic for the source of enriched events.
input.bootstrapServers	Required. Hostname and port of Kafka bootstrap servers hosting the source of enriched events.
input.consumerConf.*	Optional. A map of key/value pairs for any standard Kafka consumer configuration option.
output.bad.topicName	Required. Name of the Kafka topic that will receive failed events.
output.bad.bootstrapServers	Required. Hostname and port of Kafka bootstrap servers hosting the bad topic
output.bad.producerConf.*	Optional. A map of key/value pairs for any standard Kafka producer configuration option.
output.bad.maxRecordSize.*	Optional. Default value 1000000. Any single failed event sent to Kafka should not exceed this size in bytes

Event Hubs Authentication

You can use the input.consumerConf and output.bad.producerConf options to configure authentication to Azure event hubs using SASL. For example:

"input.consumerConf": {
    "security.protocol": "SASL_SSL"
    "sasl.mechanism": "PLAIN"
    "sasl.jaas.config": "org.apache.kafka.common.security.plain.PlainLoginModule required username=\"\$ConnectionString\" password=<PASSWORD>;"
}

Other configuration options

Parameter	Description
batching.maxBytes	Optional. Default value 16000000. Events are emitted to Snowflake when the batch reaches this size in bytes
batching.maxDelay	Optional. Default value 1 second. Events are emitted to Snowflake after a maximum of this duration, even if the maxBytes size has not been reached
batching.uploadConcurrency	Optional. Default value 3. How many batches can we send simultaneously over the network to Snowflake
retries.setupErrors.delay	Optional. Default value 30 seconds. Configures exponential backoff on errors related to how Snowflake is set up for this loader. Examples include authentication errors and permissions errors. This class of errors are reported periodically to the monitoring webhook.
retries.transientErrors.delay	Optional. Default value 1 second. Configures exponential backoff on errors that are likely to be transient. Examples include server errors and network errors.
retries.transientErrors.attempts	Optional. Default value 5. Maximum number of attempts to make before giving up on a transient error.
skipSchemas	Optional, e.g. ["iglu:com.example/skipped1/jsonschema/1-0-0"] or with wildcards ["iglu:com.example/skipped2/jsonschema/1-*-*"]. A list of schemas that won't be loaded to Snowflake. This feature could be helpful when recovering from edge-case schemas which for some reason cannot be loaded to the table.
monitoring.metrics.statsd.hostname	Optional. If set, the loader sends statsd metrics over UDP to a server on this host name.
monitoring.metrics.statsd.port	Optional. Default value 8125. If the statsd server is configured, this UDP port is used for sending metrics.
monitoring.metrics.statsd.tags.*	Optional. A map of key/value pairs to be sent along with the statsd metric.
monitoring.metrics.statsd.period	Optional. Default 1 minute. How often to report metrics to statsd.
monitoring.metrics.statsd.prefix	Optional. Default snowplow.snowflake-loader. Prefix used for the metric name when sending to statsd.
monitoring.webhook.endpoint	Optional, e.g. https://webhook.example.com. The loader will send to the webhook a payload containing details of any error related to how Snowflake is set up for this loader.
monitoring.webhook.tags.*	Optional. A map of key/value strings to be included in the payload content sent to the webhook.
sentry.dsn	Optional. Set to a Sentry URI to report unexpected runtime exceptions.
sentry.tags.*	Optional. A map of key/value strings which are passed as tags when reporting exceptions to Sentry.
telemetry.disable	Optional. Set to true to disable telemetry.
telemetry.userProvidedId	Optional. See here for more information.
output.good.jdbcLoginTimeout	Optional. Sets the login timeout on the JDBC driver which connects to Snowflake
output.good.jdbcNetworkTimeout	Optional. Sets the network timeout on the JDBC driver which connects to Snowflake
output.good.jdbcQueryTimeout	Optional. Sets the query timeout on the JDBC driver which connects to Snowflake